Storing A Line Card - Juniper EX8208 Hardware Manual

If you must rest a line card temporarily on an edge, place a cushion between the edge
and the surface.
Do not stack line cards on top of one another or on top of any other component. Place
each line card separately in an antistatic bag or on an antistatic mat placed on a flat,
stable surface.

Storing a Line Card

You must store a line card in the chassis or in a spare shipping container, horizontally and sheet metal side
down. Do not stack line cards on top of one another or on top of any other component. Place each line
card separately in an antistatic bag or on an antistatic mat placed on a flat, stable surface.
NOTE: Because a line card is heavy, and because antistatic bags are fragile, inserting the line
card into the bag is best done with two people, each to do one of the following steps.
To insert a line card into an antistatic bag:
1. Hold the line card in the horizontal position with the faceplate facing you.
2. Slide the opening of the bag over the line card connector edge.
266