Check Active Alarms With The J-Web Interface - Juniper EX8208 Hardware Manual

Table 89: Chassis Alarms for EX8200 Switches (continued)
Component Alarm Condition
Line Cards Hardware errors -
Packet Forwarding
Engine error, Line card
fails to initiate, line
card unresponsive
Sensor errors -
Temperature sensor
error, voltage sensor
error

Check Active Alarms with the J-Web Interface

Purpose
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches including alarm type,
alarm severity, and a brief description for each active alarm on the switching platform.
Action
To view the active alarms:
1. Select Monitor > Events and Alarms > View Alarms in the J-Web interface.
Severity Remedy
Major (red) Open a support case
using the Case Manager
link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll-free within the
United States and
Canada) or
1-408-745-9500 (from
outside the United
States).
Minor Open a support case
(yellow) using the Case Manager
link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll-free within the
United States and
Canada) or
1-408-745-9500 (from
outside the United
States).
Additional
Information
311