Packing Ex4200 Switch Components For Shipping - Juniper EX4200 Hardware Manual

9. If you are returning accessories or FRUs with the switch, pack them as instructed in the following
section.
10. Replace the accessory box on top of the packing foam.
11. Close the top of the cardboard shipping box and seal it with packing tape.
12. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing EX4200 Switch Components for Shipping

CAUTION:
boxes if they do not fit together on one level in the shipping box.
To pack and ship switch components:
Place individual boards in antistatic bags.
Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
Close the top of the cardboard shipping box and seal it with packing tape.
Write the RMA number on the exterior of the box to ensure proper tracking.
Do not stack switch components. Return individual components in separate
261