Packing Ex9253 Switch Components For Shipping - Juniper EX9253 Hardware Manual

11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed or place the carton cover over the switch.
13. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing EX9253 Switch Components for Shipping

Before you begin to pack a switch component, ensure that you have the following parts and tools
available:
• Antistatic bag, one for each component
• An ESD wrist strap
To pack EX9253 switch components, follow the instructions here.
CAUTION: Do not stack switch components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.
To pack EX9253 switch components:
• Place individual components in antistatic bags.
• Use the original packing materials if they are available. If the original packing materials are not
available, ensure the component is adequately packed to prevent damage during transit. The packing
material you use must be able to support the weight of the component.
• Ensure that the components are adequately protected by wrapping them well with packing materials.
Pack the component in an oversized box (if the original box is not available) with extra packing
material around the unit so that the component is prevented from moving around inside the box.
• Securely tape the box closed.
• Write the RMA number on the exterior of the box to ensure proper tracking.
RELATED DOCUMENTATION
Parts Inventory (Packing List) for an EX9253 Switch | 74
196