Juniper EX8208 Hardware Manual page 145

If any part on the packing list is missing, contact your customer service representative or contact Juniper
customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or
direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html
NOTE: All line cards ordered are shipped separately. Line cards are not listed on the switch's
packing list.
NOTE: The base configuration is available only with AC power supplies. The redundant
configuration ships with either AC or DC power supplies.
Table 66 on page 145 lists the parts and their quantities in the packing list for a base configuration and a
redundant configuration switch.
Table 66: Parts List for Different EX8208 Switch Configurations
Component
Chassis, including the backplane and
front-mounting brackets
Switch Fabric and Routing Engine (SRE)
module
Switch Fabric (SF) module
Power supplies
Power supply cords
Fan tray
Cover panels for slots without installed
components
Table 67 on page 146 lists the parts contained in the accessory box. The same accessories ship with both
configurations of the switch.
.
Base Configuration Quantity
1
1
1
2 AC
2 (1 per power supply)
1
Line card cover panels: 8
SRE module cover panel: 1
Power supply cover panels: 4
Redundant Configuration
Quantity
1
2
1
6 AC or 4 DC
6 (1 per AC power supply)
1
Line card cover panels: 8
145