Juniper EX8208 Hardware Manual page 28

Table 5: EX8208 Switch Hardware Configurations (continued)
Switch Configuration
Redundant configuration (DC)
Fully loaded chassis configuration (AC with 2000 W AC
power supplies)
Fully loaded chassis configuration (AC with 3000 W AC
power supplies)
Fully loaded chassis configuration (DC)
NOTE: You can install up to eight line cards (any combination of line cards) in the switch.
Configuration Components
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Four 2000 W DC power supplies
16 DC power cable lugs
Eight line card cover panels
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W AC power supplies
Six power cords
Eight line cards
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 3000 W AC power supplies
Six power cords
Eight line cards
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W DC power supplies
24 DC power cable lugs
Eight line cards
28