Ex8200 Management Cable Specifications And Pinouts; Management Cable Specifications - Juniper EX8208 Hardware Manual

The calculated power margin is greater than zero, indicating that the link has sufficient power for
transmission. Also, the power margin value does not exceed the maximum receiver input power. Refer
to the specification for your receiver to find the maximum receiver input power.

EX8200 Management Cable Specifications and Pinouts

IN THIS SECTION

Management Cable Specifications | 135

Console Port Connector Pinout Information | 136
USB Port Specifications for an EX Series Switch | 136
RJ-45 Management Port Connector Pinout Information | 137
RJ-45 to DB-9 Serial Port Adapter Pinout Information | 138
Management Cable Specifications
Table 62 on page 135 lists the specifications for the cables that connect the console and management ports
to management devices.
Table 62: Specifications of Cables to Connect to Management Devices
Ports
RJ-45 Console port
Management Ethernet port
Mini-USB Type-B Console
port
Cable Specifications
CAT5e UTP (unshielded
twisted pair) cable
Ethernet cable with an
RJ-45 connector
Mini-USB cable with
standard-A and Mini-USB
Type-B (5-pin) connector
Receptacle
RJ-45
RJ-45
Mini-USB
Additional Information
"Connect a Device to a
Management Console Using
an RJ-45 Connector" on
page 183
"Connect a Device to a
Network for Out-of-Band
Management" on page 182
135