Juniper EX8208 Hardware Manual page 319

EX8200-8XS, 750-046748
EX8200-40XS, 750-046750
EX8200-48F, 750-046751
EX8200-48T, 750-046749
Figure 98: Locations of the Tag and the Label on the Line Card
Label
Tag
b. Upgrade your switch to one of the following Junos OS releases (see Understanding Software Installation
on EX Series Switches) :
Junos OS Release 11.2—R1 and later
Junos OS Release 11.1—R2 and later
Junos OS Release 10.4—R5 and later
NOTE: If you are running a release prior to Junos OS Release 10.4R5 on your EX8200
switch, see this page in our Knowledge Base:
lists recommended releases for EX Series switches.
c. Reboot the switch to complete the upgrade process.
If the ON LED blinks in green but is not lit steadily:
https://kb.juniper.net/KB21476
319
. This page