Monitor System Log Messages - Juniper EX8208 Hardware Manual

2. Select an alarm filter based on alarm type, severity, description, and date range.
3. Click Go.
All the alarms matching the filter are displayed.
NOTE: When the switch is reset, the active alarms are displayed.
Meaning
Table 90 on page 312 lists the alarm output fields.
Table 90: Summary of Key Alarm Output Fields
Field Values
Type Category of the alarm:
Severity Alarm severity—either major (red) or minor (yellow or amber).
Description Brief synopsis of the alarm.
Time Date and time when the failure was detected.
SEE ALSO

Monitor System Log Messages | 312

Dashboard for EX Series Switches | 205
Understand Alarm Types and Severity Levels on EX Series Switches | 299
Monitor System Log Messages
Purpose
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such
as one related to temperature).
System—Indicates an alarm condition in the system.
312