Juniper EX8208 Hardware Manual page 41

Table 11: Slot Numbering for an EX8208 Switch (continued)
Slot Label
7
Figure 3 on page 41 shows the slot numbering, which is on the front left of the chassis.
Figure 3: Slot Numbering for an EX8208 Switch
NOTE: Figure 3 on page 41
of 8-port SFP+ line card, 48-port RJ-45 line card, and 48-port SFP line card has 4-in.-long ejector
levers.
Slots 0 through 7 accept one of the line cards available. See
on page 271.
Components Accepted in Slot
Line card
ALM
SYS
MST
shows line cards that have 2-in.-long ejector levers. An earlier version
"Installing a Line Card in an EX8200 Switch"
41