Lcd Panel In An Ex8200 Switch - Juniper EX8208 Hardware Manual
Hide thumbs
Also See for EX8208:
- Complete hardware manual (344 pages) ,
- Instruction (3 pages) ,
- Installation & removal instructions (3 pages)
Table of Contents
Advertisement
Figure 4: Slot Numbering for Power Supply Slots on an EX8208 Switch Chassis Front
NOTE:
Power supplies can be installed in any slot. You do not have to install them in serial order.
See
"Installing an AC Power Supply in an EX8200 Switch" on page 240
Supply in an EX8200 Switch" on page
LCD Panel in an EX8200 Switch
IN THIS SECTION
LCD Panel Modes | 44
LCD Panel Menus | 45
The LCD panel on the top front of the EX8200 switch chassis shows two lines of text with a maximum of
16 characters in each line. The LCD panel displays a variety of information about the switch and provides
menu options to perform basic operations such as initial configuration and switch reboot.
There are two navigation buttons—Menu and Enter—to the right of the LCD panel.
See
Figure 5 on page
43.
Figure 5: LCD Panel in an EX8200 Switch
245.
and
"Installing a DC Power
43
Advertisement
Table of Contents
Troubleshooting
