Ex8200-2Xs-40P Line Card; Line Card Models - Juniper EX8208 Hardware Manual

EX8200-2XS-40P Line Card

IN THIS SECTION

Line Card Models | 92

Line Card Components | 93
Line Card Ports | 93
The line cards in EX8200 switches combine a Packet Forwarding Engine and Ethernet interfaces on a single
assembly. They are field-replaceable units (FRUs) that can be installed in the line card slots on the front
of the switch chassis. The line cards are hot-insertable and hot-removable: You can remove and replace
them without powering off the switch or disrupting switch functions.
The EX8200-2XS-40P (40-port PoE+ with 4-port SFP and 2-port SFP+) line card offers maximum port
density for the access layer and SFP and SFP+ uplink ports for connection to the distribution layer (see
Figure 23 on page 92).
Figure 23: EX8200-2XS-40P Line Card
EX8200-2XS-40P
Line Card Models
Table 41 on page 93 shows the model number, description of the line card model, the Junos OS release
in which the model was released, the release in which support on EX8200 Virtual Chassis was introduced,
and the release in which Virtual Chassis Port (VCP) support was introduced for ports on the line card.
RJ-45
ports
PoE
Line card LEDs
SFP SFP+
ports ports
(40-43) (44,45)
92