Otto Bock Meridium 1B1-2 Series Instructions For Use Manual page 70

Use
The following parameters can be modified in MyModes:
Parameter
Heel Resist.
Rollover Resist.
Stop angle
9.5 Switching off the product
CAUTION
Using the product while switched off
Falling due to unexpected behaviour of the product because of changed damping behaviour.
► Before using the product, switch it on by connecting the power supply and battery charger.
If the prosthesis is not being worn, it switches to energy saving mode after some time (15 minutes). All sensors are
turned off. Energy saving mode is deactivated again as soon as the prosthesis is moved.
In certain cases, e.g. for storage or transportation, the prosthesis can be purposely switched off. It can only be
switched on by connecting to a live outlet, a power supply and a battery charger.
Switching off
► Connect/disconnect the battery charger to/from the product 3x. A wait time less than 3 seconds is required
before disconnecting the battery charger again.
→ After disconnecting 3 times, a descending sequence of 5 beeps is emitted and the product is then switched
off.
Switching on
1) Connect the power supply with battery charger to the socket.
2) Connect the battery charger to the product.
→ The correct connection of the battery charger to the product is indicated by feedback (see page 76 and see
page 79).
9.6 Turning Bluetooth on the prosthesis on/off
INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (function only available in
basic mode) or by connecting/disconnecting the battery charger. Bluetooth is then turned on for approx. 2
minutes. During this time, the app must be started and used to establish a connection. If required, Bluetooth on
the prosthesis can be switched on permanently afterwards (see page 70).
9.6.1 Switching Bluetooth off/on using the cockpit app
Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Rotate the component or connect/disconnect the battery charger.
70
Adjustment soft­ Setting range,
ware range app
0–195 ± 20
0–195 ± 10
-200–200 ± 10
displayed in 0.1°
Meaning
Plantar flexion damping.
How fast the forefoot is lowered when weight
is placed on the heel.
Dorsiflexion damping.
How easily the value of the "Stop angle"
parameter can be reached, in other words
how strong the resistance is to reaching the
value of the "Stop angle" parameter.
Ankle angle from which motion in the rollover
direction (in direction of dorsiflexion) is
locked.
1B1-2=* Meridium