Otto Bock Meridium 1B1-2 Series Instructions For Use Manual page 54

Scope of Delivery and Accessories
CAUTION
Improper mode switching with the mobile device
Falling due to unexpected product behaviour because of changed damping behaviour.
► Ensure that the patient stands securely during all switching processes.
► Inform the patient that the changed damping characteristics have to be verified after switching, and feedback
from the acoustic signal emitter and the mobile device display must be observed.
► Switching back to basic mode is mandatory once the activities in the MyMode have been completed.
NOTICE
Failure to observe the system requirements for the installation of the Cockpit app
Mobile device malfunction.
► The Cockpit App should only be installed on mobile devices and versions which comply with the specifica­
tions in the respective online stores (e.g. Apple App Store, Google Play Store, ...)
INFORMATION
The illustrations in these instructions for use are only examples and may deviate from the respective mobile device
being used and the version.
5 Scope of Delivery and Accessories
5.1 Scope of delivery
• 1 pc. 1B1-2 Meridium
• 1 pc. 757L16-4 power supply
• 1 pc. 4E50-2 C-Leg battery charger
• 1 pc. 646C107 Bluetooth PIN card
• 1 pc. 647F542 prosthesis passport
• 1 pc. Instructions for use (qualified personnel)
• 1 pc. Instructions for use (user)
• 1 pc. 2C7 footshell inc. instructions for use
• 1 pc. 4G872=* set of cover caps
• 1 pc. 2C101 footshell replacement tool
Cockpit app for download from the website: https://www.ottobock.com/cockpitapp
• "Cockpit 4X441-IOS=V*" app for iOS
• "Cockpit 4X441-ANDR=V*" app for Android
5.2 Accessories
The following components are not included in the scope of delivery and may be ordered separately:
• 60X5 BionicLink PC
• 1 pc. 757P48 Y adapter cable
This is for charging more than one product at the same time (e.g. 1B1-2; 1B1; 3B1/3B1=ST; 3B1-2/3B1-2=ST;
3B5-X3/3B5-X3=ST; 3C98-2/3C88-2; 3C98-3/3C88-3; 3C96-1/3C86-1) with the 757L16-4 power supply.
• 704G30 clamping tool
6 Charging the battery
The following points must be observed when charging the battery:
• Use the 757L16-4 power supply and 4E50-2 battery charger to charge the battery.
• The capacity of a fully charged battery is sufficient for one full day.
• We recommend charging the product once a day when used by the patient on a daily basis.
• For the maximum operating time with one battery charge, disconnecting the battery charger from the product
only immediately before using the product is recommended.
54 1B1-2=* Meridium