Mrcp Asr Subsystem Is Out Of Service; Changes, Additions, Or Deletions To Mrcp Asr Providers, Mrcp Servers, Or Groups Do Not Take Effect - Cisco Unified Contact Center Express Servicing And Troubleshooting Manual

Chapter 8 Troubleshooting Tips
Select Subsystems > MRCP ASR > MRCP ASR Provider Configuration.
Step 1
Click the MRCP ASR Dialog Groups link on the left panel
Step 2
Either click the Add MRCP ASR Dialog Control Grouplink or select an existing group.
Step 3
Modify the value of Max.Number of Sessions as prescribed above. Overprovision this value by a factor
Step 4
of 1.2 or by an additional 20 percent.
Click Update or Add as appropriate.
Step 5

MRCP ASR subsystem is out of service

Symptom
of service.
Error Message None.
The cause could be one of the following: .
•
•
•
Recommended Action
Verify that the MRCP Provider and Servers are configured through the MRCP ASR Configuration web
Step 1
page.
Step 2 Verify that the MRCP ASR servers are up and reachable.
Changes, additions, or deletions to MRCP ASR Providers, MRCP Servers, or
Groups do not take effect
Symptom
Administration do not seem to take effect.
Error Message None.
Possible Cause
Recommended Action
engine, do the following:
The Engine Status area in the Engine web page shows that the MRCP ASR subsystem is out
The MRCP Provider and Server are not configured from the MRCP ASR Configuration web page.
The MRCP ASR Server(s) is down or unreachable.
The Speech Server is not configured from the MRCP ASR Configuration web page
Complete the following steps:
Changes made to either MRCP ASR Providers, MRCP Servers, or Groups through CRS
When you make any configuration changes (including additions or deletions) to either
MRCP ASR Providers, MRCP Servers, or Groups including changes to locales through CRS
Administration, these changes are made in the Config datastore and do not affect the data that is
already loaded by the engine. If you wish to make these changes effective immediately without
having to restart the engine, the changes need to be explicitly reloaded by the MRCP ASR
Subsystem.
If you want the changes to take effect immediately without having to restart the
Cisco Customer Response Solutions Servicing and Troubleshooting Guide, Release 5.0(1)
Automatic Speech Recognition (ASR) Problems
8-55