Cabletron Systems Netlink FRX8000 User Manual page 359

Alarms
291.
Node "n", Type "n", LP "n" in database but does not exist
Severity: 4
Meaning: The LP file contains a record for LP "n," but either the hardware is
not installed or the configuration is wrong.
Action: Install the LP or fix the configuration.
292.
Node "n" LP "n" exists but not loaded due to mismatch with database
Severity: 3
Meaning: The LP type specified in the database does not match the physical
type that exists in the system, so it was not loaded during IPL.
Action: Check the LP record and change the LP type, if necessary.
293.
Node "n", LP "n" exists but is not in database
Severity: 4
Meaning: The packet processing system has found an LP in the node for which
there is no record in the database.
Action: Create a record for this LP.
294.
IPL of DPPM node "n", LP "n" complete
Severity: 4
Meaning: Self-explanatory.
304.
LP "n" Threshold violation LP Percent Buffers in Use Threshold "n",
Current value "n"
Severity: 4
Meaning: The statistic has crossed the threshold.
305.
LP "n" Threshold violation LP Number of Queued messages Threshold "n",
Current value "n"
Severity: 4
Meaning: The statistic has crossed the threshold.
306.
LP "n" Threshold violation LP Received Frames/Sec (*10) Threshold "n",
Current value "n"
Severity: 4
Meaning: The statistic has crossed the threshold.
307.
LP "n" Threshold violation LP Transmitted Frames/Sec (*10) Threshold "n",
Current value "n"
Severity: 4
Meaning: The statistic has crossed the threshold.
21-37