Configuring A Bsc Interactive Port Record; Bsc Interactive Port Record - Cabletron Systems Netlink FRX8000 User Manual

Configuring a BSC Interactive Port Record

When Changes Take Effect at the Port
Configuring BSC
To configure a record for a BSC Interactive port, press
Selection Menu (or
[A], [D], [A], [C]
(of the node containing the port):
Node ID
(of the LP containing the port):
LP ID
: .
Port 0–7
Any other requested information, noting the values in
at a prompt to specify the default value.)
Port Maintenan ce
* Nod e ID
* LP I D
* Port
A Port Type
B Physical In terface
C Block ed Port Flag
D Line S peed Cod e
E Retransmiss ion Period (ms)
F Maximu m R etrans mis sions
G Maximu m Bytes per Frame
H Gen erate C lock
I Rcv Clock (TT) from DTE
J Mask Link Alarms
1 Ad dition al BSC Params
2 In teractive Params.
Select:
Figure 12-2 BSC Interactive Port Record
Item will be displayed only if
I
and
Generate Clock
Pressing or will display more parameters, listed in
[1] [2]
When you add a new Port record, it will be written to the database as soon as you enter
the final parameter value. When you modify a parameter in an existing record, the
change will be written to the database immediately.
The change will become effective at the port in one of the following ways:
Press while still in Maintenance operations on the record. This will tempo-
[F7]
rarily disable the port, then write the change to the software running in the node.
Re-IPL the node containing the changed port.
from the Main Menu). When prompted, enter:
1–250
. (Default is
0–7
10 n ode10
0 RLP
1
13 BSC In ter
3 V.35
N
10 9600 b ps
2000
5
4105
Y
N
N
[A],[D],[A],[C]
Physical Interface
is
Y.
, then from the Ports
[A] [C]
. (Default is the "local" node.)
.)
0
Table 12-1. (Press
from Main Menu
is , or
RS-530, RS-422
Table 12-1.
[Enter]
,
V.35
12-3