Call Accounting File Structure - Cabletron Systems Netlink FRX8000 User Manual

Rolling the File Over
18-16
Number of D igits
2 2 2 2 2 2 1 2
PVC Reason
Y R MO D Y H RMN S C SVC Code
0 = SVC
1 = PVC
01 = P VC S etup
02 = S VC Call Request
S 22 = Remote s ubscriber cleared call
S 25 = Line down (failed)
34 = S ubscriber s ent illegal Call Request
35 = S ubscriber s ent illegal Call A ccept
S 36 = Local S VC cleared
37 = S ubscriber s ent illegal Clear Confirm
44 = Local s ubscriber iss ued Reset
S 46 = Local s ubscriber iss ued Restart Request
S 47 = Local s ubscriber s ent illegal Restart Confirm
59 = Remote s ubscriber iss ued Reset
67 = S ubscriber did not res pond to Reset
SP 79 = Line down per operator reques t or IP L
99 = P eriodic activity report
P ath A
Reason Code
01 or 02
Path B
Reas on Code
03 or higher
Figure 18-5 Call Accounting File Structure
Press at the Node Operations Menu (or
[E]
prompted, enter:
Your low-level operations password.
The ID of the node whose accounting file you want to roll over.
At the ICP/INM/NMP, the last block of the current file will be written, the file closed,
and a new version created. A printer message at that node will signal completion of
the rollover.
The closed file is named CAF.yymmddhhmm, where yymmddhhmm is the date and
time the file was closed.
If you perform a rollover twice within one minute, the first
backup file created will be written over by the second.
3 1 2 15 4
Local Local Local Local
N ode LP Port S ub ID LCN
2 3 4 2
Local Local Local Remote
Thruput Window Packet Thruput
Class Size Size Class
0 = Autobaud
6 8 8
Pkts Sent Sgmts Sent Bytes Sent
Local to Local to Local to
Remote Remote Remote
Notes
1. Subs criber ID is always 15 digits. U nused digits will be filled w ith blanks.
2. Under R eas on Code : S means SVC call was terminated.
3. For setup and trans fer priorities, negative numbers will convert to 9 through F .
[B], [B], [E]
3 1 2 15
Remote Remote Remote Remote
Node LP Port SU B ID
Remote LP 8 = special process
LP 8/Remote Port 2 = Test Services
LP 8/Remote Port 3 = Message S ervices
Reason Code 02 only
3 4 2 0-65
Remote Remote
Window Packet Length
Size Size of NUI N UI
6 8 8
P kts Sent Sgmts S ent Bytes S ent
Remote to Remote to Remote to
Local Local Local
P means PV C was removed.
from the Main Menu). When
FRX8000 3.0 User Guide, Rev 02
4 To P ath
A or B
LCN below
2 2
Call Reverse
S etup Charge
Priority 0= N,1=Y