Ipx Sap Filter Parameters - Cabletron Systems Netlink FRX8000 User Manual

SAP Filter Parameters
Filter Name
Service Type Value
Server Name
Network Address Value
Node Address Value
Socket Address Value
15-14
Parameter
Filter Name
Service Type Value
Service Type Mask
Server Name
Network Address Value
Network Address Mask
Node Address Value
Node Address Mask
Socket Address Value
Socket Address Mask
helps the user identify the filter. The name is not used by the software.
is a SAP Service Type code. Some common types are:
= print queue
0003
= print server
0007
identifies a specific server whose incoming/outgoing packets will be affected by the
SAP filter.
identifies the network containing the server identified by
identifies the node to which the filter will be applied.
is an IPX socket number that identifies a process or protocol. Some Novell socket
numbers are:
= NCP Process
0451
= NetBIOS Process
0455
Table 15-6 IPX SAP Filter Parameters
Valid Values
1–31 characters
0–ffff
0–ffff
1–42 characters
0–ffffffff
0–ffffffff
0–ffffffffffff
0–ffffffffffff
0–ffff
0–ffff
= file server
0004
= archive server
0009
= SAP Process
0452
= Diagnostics Process
0456
Default Value
none
(2 bytes) ffff
(2 bytes) ffff
asterisk (wildcard)
(4 bytes) ffffffff
(4 bytes) ffffffff
(6 bytes) ffffffffffff
(6 bytes) ffffffffffff
(2 bytes)
ffff
(2 bytes)
ffff
= job server
0005
= remote bridge server
0024
Server Name
= RIP Process
0453
FRX8000 3.0 User Guide, Rev 02
.