V.25Bis Modem Operations; V.25Bis Dial Port Status Screen - Cabletron Systems Netlink FRX8000 User Manual

V.25bis Modem Operations

18-2
Select item or from the On-Line Port Operations Menu. When prompted, enter the
A C
LP and port numbers.
A disabled port's state is reported as
the port can neither send nor receive packets.
These operations allow you to view V.25 port status for a node, as well as send infor-
mation (e.g., new modem INI string) to a modem or disconnect a call.
A disabled port's state is reported as
the port can neither send nor receive packets.
Press at the On-Line Port Operations Menu. When prompted, enter a node number.
[K]
V25 Bis Dial Port for Nod e 10
A LP 0
B LP 0
C LP 1
D LP 1
E LP 1
Select Port:
Figure 18-2 V.25bis Dial Port Status Screen
The above screen will display up to 16 ports. If the node has more than 16 V.25bis
ports, Page 1 will be displayed in the upper right corner. Pressing
page 2. (At the page 2 display, pressing
The various modem status messages are self-explanatory.
To perform modem operations at a port, press the letter (see Figure 18-2) that corre-
sponds to the port. When prompted, enter your low-level operations password. A
screen similar to Figure 18-3 will be displayed.
Port 0 D ial Pending
Port 3 Modem Pres en t, Idle
Port 2 Modem in In teractive Mode
Port 3 Trun k Establis hed
Port 5 C all in Progress 1122000
will display page 1.)
[F2]
on status displays, and
Link_Disabled
on status displays, and
Link_Disabled
[B],[A],[K] from Main Menu
[F2]
FRX8000 3.0 User Guide, Rev 02
will display