Frx8000 Inm Main Menu - Cabletron Systems Netlink FRX8000 User Manual

Stopping an INM
Starting and Stopping Nodes and NMPS
Either way, the following screen will appear.
N etlink FR X8000
Main Menu
A Con figu ration
B Op erations
C Statu s Displays
D Alarms
E Tes ts
F S tatis tics
G R ep orts
H Graphics-Level S tatus Disp lay
R Exit to System Prompt
Figure G-2 FRX8000 INM Main Menu
Item
H
If the following steps are not followed accurately, file corruption
can occur.
1. The first step depends on the state of the INM's display:
If the FRX8000 Test Menu (or one of its sub-menus) is displayed,
go to step 2.
If the Main Menu (or one of its sub-menus) is displayed,
then go to step 2.
2. Press at the FRX8000 Test Menu.
[C]
3. When prompted:
Reboot (R to reboot, T to terminate)
4. At the prompt, type
[NETLINK]
5. At the
scosysv!login:
6. When asked for a password, type
7. At the prompt, type
#
8. After about a minute, you will be prompted:
Type to continue with the shutdown process.
y [Enter]
is displayed only on a local VGA monitor.
logout [Enter]
prompt, type
root [Enter]
mypass [Enter]
sync; shutdown -g0 [Enter]
press [F1]
, press .
[T]
.
.
.
. (Ignore any warnings to log off.)
Do you want to continue?
,
G-5