The Initialization Report - Cabletron Systems Netlink FRX8000 User Manual

Rebooting an N7500/ICP/INM

The Initialization Report

G-10
8. Messages will be displayed, ending with:
** Safe to Power Off **
- or -
**Press any key to Reboot**
9. Switch the unit off.
1. If the screen is blank or is displaying
mance Display (Figure
If rebooting an N7500-INM from the menu level, press
press to display a blank screen, then press
[F1]
2. When prompted:
Reboot (Y to reboot, T to terminate)
As a node boots, screen information tracks the loading of LPs, verifies configuration
file format, and displays any errors. This data is saved in a file named BOOTRPT.TXT,
which can be used to verify that startup proceeded without errors, or to verify the
number and types of LPs in the node. This file will be retained until the next time the
node undergoes IPL. At that time, the contents of BOOTRPT.TXT will be copied to a
file called BOOTBAK.TXT, and a new BOOTRPT.TXT will be created.
A report containing the contents of BOOTRPT.TXT can be displayed, printed, or saved
to a file for later use. To create the report, follow this procedure at an operational INM
or NMP:
1. Press at the Reports Menu (or
[F]
2. When prompted, enter the ID of the desired node, or press
default of
All Nodes
3. You will be prompted:
To print the report, type
To save the report to a file, type
specification, enter a file name for the report.
To display the report on the screen, type
If there are problems during initialization and changes are made to fix these problems,
the two reports can be compared to see what effect the changes had.
Node is Operational
G-3) is on the screen, press
from the Main Menu).
[G], [F]
.
Display Opt. P, F, V:
.
p [Enter]
f [Enter]
, press . If the Perfor-
[R]
twice.
[R]
at the Main Menu,
[R]
.
[R]
, press .
[Y]
to specify the
[Enter]
. When prompted for a file
.
v [Enter]
FRX8000 3.0 User Guide, Rev 02