Bsc Interactive Device Parameter - Cabletron Systems Netlink FRX8000 User Manual

When Changes Take Effect
BSC Interactive Device Parameters
Single User Virtual Circ. (Circuit)
Transparent Text Support
12-14
Changes to this file will take effect when the associated port is updated by one of the
methods described under
Table 12-5 BSC Interactive Device Parameter
Parameter
Single User Virtual Cir.
Tr ansparent Text Support
Device Type
1 This must be left at the default value.
specifies (if N ) that each end of the connection is within a different Control Unit/
Device Type pair. Currently, this must be configured as
causes (if ) all characters transmitted, including control character sequences, to be
Y
treated as data. This is useful for transmitting binary data, machine language computer
programs, etc., without special coding.
Data-link control character sequences transmitted during transparent mode must be
preceded by character 1/0 (DLE) in order to be recognized as control characters.
"When Changes Take Effect at the
Valid Values
Y/N
Y/N
0
(terminal)
Port" on page 12-3.
Default Value
1
N
Y
, 1 0
(printer) (terminal)
.
N
FRX8000 3.0 User Guide, Rev 02