Node Performance Display - Cabletron Systems Netlink FRX8000 User Manual

Stopping an N7500/ICP/INM
Starting and Stopping Nodes and NMPS
4. At the prompt:
[NETLINK]
If at a VGA monitor, type
If at an Async Console, type
The procedure described here requires an attached keyboard and monitor. If they are
not present, the node can be shut down only by switching it off.
If the following steps are not followed accurately, file corruption
can occur.
1. If the screen is blank or is displaying
mance Display (Figure G-3) is on the screen, press
If shutting down an N7500-INM from the menu level, press
press to display a blank screen, then press
[F1]
FRX8000 8000 Performance Disp lay
Trans mit
R eceive
Trans fers/Sec ^______^______^______^______^______^______^______^______^
0
Figure G-3 Node Performance Display
2. When prompted:
Reboot (Y to reboot, T to terminate)
3. At the prompt, type
[NETLINK]
4. At the
scosysv!login: prompt
5. When asked for a password, type
6. At the prompt, type
#
7. After about a minute, you will be prompted:
Type to continue with the shutdown process.
y [Enter]
gcon [Enter]
consol [Enter]
Node is Operational,
32 64 96 128 160
logout [Enter]
, type
root [Enter]
mypass [Enter]
sync; shutdown -g0 [Enter]
.
.
press
[R]
twice.
[R]
at the Main Menu,
[R]
.
[R]
192 224 256
, press .
[T]
.
.
.
. (Ignore any warnings to log off.)
Do you want to continue?
. If the Perfor-
G-9