Lan Card Statistics Displays - Cabletron Systems Netlink FRX8000 User Manual

LAN Card Statistics Displays

20-22
LAN Card statistics track traffic over the LAN interface. Press
Menu and, when prompted, enter:
Node number: 1–250.
LAN Card Number
The display will depend on whether the LAN card is Ethernet
Ring (Figure 20-13).
On either display:
Hardware Status
Not Installed
Failed Startup Diagnostics
Failed due to Configuration Problem
Not Operational due to Hardware Fault
Operating Marginally due to Soft Faults
Fully Operational
MAC Status
Bound
Open
Packet Filter
packets that can be received on this interface (more than one category can
be specified):
Directed and Multicast or Group and Functional
Broadcast
Promiscuous
Any Source Packet
: .
0–1
will be one of these:
can be either/both/neither of these:
(the MAC and protocol drivers are linked to enable
enable communication between them),
(the OpenAdapter function, which activates the
adapter's network connection, is enabled).
(set in commands from the protocol) specifies the types of
(any packet on the LAN)
(any source routing packet on the LAN)
at the Statistics
[l]
(Figure 20-12) or Token
FRX8000 3.0 User Guide, Rev 02