Ipx Packet Filter Parameters - Cabletron Systems Netlink FRX8000 User Manual

Packet Filter Parameters
Filter Name
Packet Type Value
Destination Network Value
Destination Node Value
Destination Socket Value
Source Network Value
Configuring IPX
Table 15-7 IPX Packet Filter Parameters
Parameter
Filter Name
Packet Type Value
Packet Type Mask
Destination Network Value
Destination Network Mask
Destination Node Value
Destination Node Mask
Destination Socket Value
Destination Socket Mask
Source Network Value
Source Network Mask
Source Node Value
Source Node Mask
Source Socket Value
Source Socket Mask
helps the user identify the filter. The name is not used by the software.
= unknown packet type
00
= RIP packet
01
= SAP packet
04
= SPX (Sequenced Packet Exchange) packet
05
= NCP (NetWare Core Protocol) packet
11
= Propagated packet, used for NetBIOS (an IBM protocol that performs
14
transport- and session-layer tasks)
is the network number of the destination node's network.
is the physical address of the destination node. The node's internetwork address is the
network number followed by the node address followed by the socket number.
is the socket address of the packet's destination process.
is the network number of the source node's network.
Valid Values
1–32 characters
0–ff (1 byte)
0–ff (1 byte)
0–ffffffff (4 bytes)
0–ffffffff (4 bytes)
0–ffffffffffff (6 bytes)
0–ffffffffffff (6 bytes)
0–ffff (2 bytes)
(2 bytes)
0–ffff
(4 bytes)
0–ffffffff
(4 bytes)
0–ffffffff
(6 bytes)
0–ffffffffffff
(6 bytes)
0–ffffffffffff
0–ffff (2 bytes)
0–ffff (2 bytes)
Default Value
none
ff
ff
ffffffff
ffffffff
ffffffffffff
ffffffffffff
ffff
ffff
ffffffff
ffffffff
ffffffffffff
ffffffffffff
0451
0451
15-15