Chapter 16 Introduction To System Operation; Frx8000 Switch Main Menu - Cabletron Systems Netlink FRX8000 User Manual

Introduction to System Operation
Once the database has been configured and the node has been brought on line in the
network, little operator intervention is generally necessary. The various functions that
can be performed from the menus allow the operator to do such things as:
Perform on-line updates to nodes.
Enable and disable ports, useful for maintenance or updates, or for preventing
use of particular ports (for any reason).
Re-IPL (restart) remote nodes, also useful for maintenance or updates.
Monitor status of the nodes, ports, connections, or traffic.
Display alarm messages.
Display statistics for LPs, ports, and IP interfaces.
Produce reports on configuration and boot messages.
For reference, the following figure shows the Main Menu.
Netlin k FR X8000
Main Menu
A Con figu ration
B Op erations
C Statu s D is plays
D Events
E Tes ts
F S tatis tics
G R ep orts
H Graphics-Level S tatus Disp lay
R Exit to System Prompt
Select:
Figure 17-1 FRX8000 Switch Main Menu
Item
H
Item
A
will be displayed only on a local VGA monitor.
is documented in Section II.
Chapter 17