Cabletron Systems Netlink FRX8000 User Manual page 358

21-36
avoid this, you should wait until IPL is complete before starting
gcon/consol
279.
LP "n" exists but not loaded due to type mismatch with database
Severity: 3
Meaning: The LP type specified in the database does not match the physical
type that exists in the system, so it was not loaded during IPL.
Action: Check the LP record and make sure the correct type is specified.
284.
Node "n" requesting alarms and statistics for IPL
Severity: 4
Meaning: The node is asking its
record (described in Chapter 5) for database files so it can proceed
with its IPL.
285.
Node "n", LP "n" LIC "n" requesting port parameters for IPL
Severity: 4
Meaning: The node is asking its
record (described in Chapter 5) for database files so it can proceed
with its IPL.
286.
Node "n" performing IPL
Severity: 4
Meaning: The node has obtained the database files from the INM/NMP and is
proceeding with IPL.
287.
Accounting information file rollover request sent to Node "n"
Severity: 4
Meaning: The operator has requested that the Call Accounting file (CAF.DAT)
on node "n" be closed and a new one created.
288.
New accounting information file has been created for Node "n"
Severity: 4
Meaning: Self-explanatory.
289.
Error "n" accessing accounting information file on Node "n"
Severity: 2
Meaning: Self-explanatory.
Action: Contact
290.
Cannot create accounting information file for Node "n"
Severity: 2
Meaning: Self-explanatory—the disk is probably full.
Action: Contact
operations.
Alternate NMP Node
Alternate NMP Node
Cabletron Systems Technical
Cabletron Systems Technical
(as specified in its Node
(as specified in its Node
Support. (See page 21-7.)
Support. (See page 21-7.)
FRX8000 3.0 User Guide, Rev 02