Cabletron Systems Netlink FRX8000 User Manual page 386
Fully integrated lan/wan enterprise switch
Hide thumbs
Also See for Netlink FRX8000:
- Reference manual (238 pages) ,
- Installation and setup manual (94 pages)
Table of Contents
Advertisement
21-64
652
LP "n" LIC "n" Receive Remote Alarm condition set
Severity:
2
Meaning:
The remote device is not receiving the signal from the local device.
Action:
Check the E-1 cable at the local end of the connection. If it is
securely connected and everything else appears operational, contact
your carrier.
653.
LP "n" LIC "n" Receive Loss of Sync condition Cleared
Severity:
4
Meaning:
The situation that caused alarm 650 has been fixed. However, the E-
1 connection will not be operational if any of alarms 650–652 has
been set but not cleared.
654.
LP "n" LIC "n" Receive Loss of Sync condition Cleared
Severity:
4
Meaning:
The situation that caused alarm 651 has been fixed. However, the E-
1 connection will not be operational if any of alarms 650–652 has
been set but not cleared.
655.
LP "n" LIC "n" Receive Loss of Sync condition Cleared
Severity:
4
Meaning:
The situation that caused alarm 652 has been fixed. However, the E-
1 connection will not be operational if any of alarms 650–652 has
been set but not cleared.
701.
SDLC Sec. Link Stn Not Responding
Severity:
2
Meaning:
Self-explanatory. (
Action:
Check the PU to make sure it is operational.
702.
SDLC Link Stn Sent DM
Severity:
2
Meaning:
The link station sent a Disconnect Mode response, and the logical
link is down.
Action:
None.
704.
SDLC Link Stn rcvd FRMR
Severity:
2
Meaning:
The remote device received an invalid command and responded
with a Frame Reject.
Action:
None.
705.
SDLC Stn rcvd FRMR, IFLD invalid
Severity:
2
is the Secondary Link Station.)
Sec. Link Stn
FRX8000 3.0 User Guide, Rev 02
Advertisement
Table of Contents
Need help?
Do you have a question about the Netlink FRX8000 and is the answer not in the manual?
Questions and answers