Trunk Status Display - Cabletron Systems Netlink FRX8000 User Manual

Information in this Display
Trunks
Status Displays
and are the RLP and port numbers
L P
is the port type:
Type
= X.25
X25
= SNA
SNA
= Ethernet
Eth
= Logical X.25
Log
is packets per second passing through the port.
PPS
is the number of virtual connections currently in use.
Conn#
: Level 2 link is up, except for frame relay PVCs, where this state
State Linkup
means that LMI is running.
Level 2 is up and level 3 is starting its initial handshake sequence.
Restarting
The line is up and ready to establish a connection or transfer data.
Operational
The link has been broken by the
Disabled
: For X.25, level 1 is up but level 2 cannot be established. For SNA
Disconnect
HPAD, no XID or SNRM command frame has been received for
any link address configured for the HPAD subscriber.
The port is configured in the database, but the LP is not installed.
Configured
Some modem controls are not present, and the physical link is
Failed
down.
Hardware Fault
Trunk S tatus Display
Examine Trun k S tatus for Nod e: 10
LP 0Port0 Trk PortEs tablis hed to Nod e 11
LP 0Port1 Log Trk 1Established to N ode 20
LP 0Port2 Log Trk 1Established to N ode 20
LP 2Port0 Trk PortEs tablis hed to Nod e 12
LP 2Port3 Disconnected
Hit any key to con tin ue
= Frame relay
FRL
= BSC Interactive
BSCI
= 802.3
8023
is self-explanatory.
Figure 19-3 Trunk Status Display
= Async PAD
ASY
= Logical
LOG
= 802.5.
8025
operation.
Disable Port
[C],[E] from Main Menu
19-3