Cabletron Systems Netlink FRX8000 User Manual page 266

18-10
1. After selecting
All Software Update
to specify all nodes.
[Enter]
File names will be displayed as the files are downloaded. When the operation is
finished,
Download is complete
2. When asked:
Download to attached NMP?
least 30 minutes. File names will be displayed as the files are downloaded. When
the operation is finished,
3. Press to return to the Boot Disk Download Operations Menu, then press
[Enter]
to download a single file.
[E]
4. When prompted, enter the destination node ID.
5. When prompted for a source file name, type
6. When prompted for a destination file name, type
7. When notified that the download is complete, repeat steps 3–6 three times, the
first time downloading source file name dos/newstart to destination file name
UNSYS.EXE, the second time downloading source file name dos/start to desti-
nation file name start.new, and the third time downloading source file name ICP/
upia.o to destination file name upia.o.
8. When the last download is complete, press
Download Operations Menu, then press
9. When prompted, enter the source node ID. (If you are transferring the file from
an NMP, this is the ID of the attached node.)
10. When prompted for a source file name, type
11. When prompted, enter the destination node ID.
12. When prompted for a destination file name, type
13. When notified that the transfer is complete, press
9–12, transferring source file name NMP/rc.once to destination file name rc.once.
14. When the second transfer is complete, press
ations Menu.
Once software has been downloaded to both the node and its NMP, follow these steps
at the remote site:
1. At the NMP, press
2. At the prompt, type
[NETLINK]
3. At the next
[NETLINK]
......)
can't access
4. At the next
[NETLINK]
5. When prompted, enter your root password.
6. At the prompt, type:
#
7. At the next prompt, type
#
8. At the next prompt, type
#
9. When asked (after 5-10 minutes):
type .
y [Enter]
, enter (when prompted) a node ID or press
will be displayed.
, type
Download is complete
[R], [R], [F]
at the Main Menu.
[R]
stop [Enter]
prompt, type
rc.once [Enter]
prompt, type
su [Enter]
cp pia.o /etc/conf/pack.d/pia/Driver.o [Enter]
cd /etc/conf [Enter]
/etc/conf/bin/idbuild [Enter]
Do you want this kernel to boot by default?
This process will take at
y [Enter].
will be displayed.
dos/UNSYS.EXE [Enter]
unsys.exe [Enter]
to return to the Boot Disk
[Enter]
to perform
Transfer File
.
NMP/pia.o [Enter]
.
pia.o [Enter]
, then , and repeat steps
[Enter] [F]
to return to the Network Oper-
[Enter]
.
. (Ignore the warnings that say:
.
.
.
FRX8000 3.0 User Guide, Rev 02
.
.
.
.
,