Ip Interface Parameters - Cabletron Systems Netlink FRX8000 User Manual

IP Interface Parameters

Maximum Transmission Unit
Configuring IP
Parameter
Maximum Transmission Unit
Network Mask
Routing Metric Count
ICMP Redirects
RIP Flash Updates (sec)
RIP Full Updates (sec)
Interface Type
Source IP Address
Destination IP Address
Broadcast IP Address
Source Subscriber
Destination Subscriber
SVC Retry Timer (sec)
SVC Idle Timer (min)
Max VCs to Establish
PVC Connection
Source Card
Source Port
Source DLCI
Bandw. Alloc. Group
The address specified here must also be configured in a
1
page 9-14). In that record,
the interface, the RLP configured for IP, and port 64. (All other parameters can remain
at the default values.)
The address specified here must also be configured in a
2
page 9-14). In that record,
X.25 port that will be used for the physical interface. (That RLP does not need to be the
one with IP installed.)
specifying 0 means that the DLCI is not assigned to a bandwidth allocation group.
3
Specify
for all connections on the same source DLCI; otherwise, allo-
cation will be unpredictable between assigned and unassigned
traffic.
is the maximum size (in bytes) of the data field that can be used to encapsulate an IP
datagram for transmission over the interface. Any IP datagrams larger than the
Maximum Transmission Unit (MTU) will be fragmented, resulting in additional pro-
cessing on any intermediate routers or gateways, as well as the destination host. If the
Table 14-1 IP Interface Parameters
Valid Values
(network interface)
1–576
1–1500
1–4096
valid IP address
0–255
Y/N
0–300
0–300
0–5
valid IP address
valid IP address
valid IP address
valid subscriber address
valid subscriber address
5–60
0–5
1–8
Y/N
0–7
0–63
16–991
(if FR interface)
0–16
1–3 (if network interface)
must be configured as the node containing
1st Routing Path
1st Routing Path must be configured as the node, RLP, and
0
for Bandwidth Allocation Group only if
Default Value
576
(Ethernet interface)
1500
(other interfaces) 4096
255.0.0.0
0
N
60
120
0 (X.25)
0.0.0.0
0.0.0.0
0.0.0.0
1
none
2
none
20
1
1
N
0
0
16
3
1
Subscriber record (described on
Subscriber record (described on
0
is specified
14-5