Cabletron Systems Netlink FRX8000 User Manual page 105

Facilities Parameters
Preferential CUG Flag
Preferential CUG Index
Incoming Access Allowed
Outgoing Access Allowed
Local Charging Prevention
Reverse Charge Acceptance
Fast Select Acceptance
Incoming Calls Barred
Outgoing Calls Barred
Configuring Inter-Nodal Trunks
specifies whether the port belongs to any CUGs.
is a default Closed User Group for the port. Any calls that do not specify a CUG will
default to this one. A new record has CUG 0 specified here; this is not a valid number,
and signifies that the subscriber belongs to no CUGs.
determines whether this port will be allowed to receive calls from outside its CUGs.
It is a CCITT requirement that a user allow incoming access to all or none (but not
some) of its CUGs.
determines whether this port will be allowed to make calls outside its CUGs. It is a
CCITT requirement that a user allow outgoing access from all or none (but not some)
of its CUGs.
if is selected for this parameter, no calls can be charged to this port. Incoming calls
Y
from the network with Reverse Charging specified will be rejected; outgoing calls will
have Reverse Charging inserted if it is not already in the call packet.
authorizes transmission of incoming calls that request the X.25 Reverse Charging
facility. If is selected for this parameter and a call requests Reverse Charging, the
N
call will not be transmitted.
authorizes transmission of incoming calls that request the X.25 Fast Select facility.
is an X.25 facility that prevents transmission of incoming calls to the local DTE.
is an X.25 facility that prevents transmission of outgoing calls from the local DTE.
7-25