Cabletron Systems Netlink FRX8000 User Manual page 127

Restart Timer
Incoming Call Timer
Reset Timer
Clear Timer
DTE Restart Retry Count
DTE Reset Retry Count
DTE Clear Retry Count
Line Setup Retries
Modem INI Name
Configuring X.25
will be started when the port issues a Restart Request, and stopped (and reset) when a
Restart Confirmation or Restart Indication is received. If the timer expires, the port
will retransmit the Restart Request.
will be started when the port issues a Call Request packet, and stopped (and reset)
when a Call Connected, Clear Indication, or Incoming Call is received. If the timer
expires, the port will send a Clear Request.
will be started when the port issues a Reset Request, and stopped (and reset) when a
Reset Confirmation or Reset Indication is received. If the timer expires, the port will
retransmit the Reset Request.
will be started when the port issues a Clear Request, and stopped (and reset) when a
Clear Confirmation or Clear Indication is received. If the timer expires, the port will
retransmit the Clear Request.
is the number of times a Restart Request from the logical DTE will be transmitted.
(The DTE will stop issuing the request on receipt of a Restart Confirmation or Restart
Indication.) If the Restart Retransmit Count expires, restart and recovery procedures
should be initiated.
is the number of times a Reset Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Reset Confirmation or Reset Indi-
cation.) If the Reset Retransmit Count expires, restart and recovery procedures should
be initiated.
is the number of times a Clear Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Clear Confirmation or Clear Indi-
cation.) If the Clear Retransmit Count expires, recovery procedures should be ini-
tiated.
is the number of times the node will attempt to initialize the V.25 modem on this port
if the node does not receive an OK after sending a modem initialization string. (See
"V.25bis Modem Operations" on page 9-12.)
identifies a string of data that will be sent to the modem each time the connection is
initialized. The actual data is specified in the
page 9-12).
Modem Initialization file (described on
9-9