Logical X.25 Port Record - Cabletron Systems Netlink FRX8000 User Manual

Configuring X.25
Port Maintenance
* Nod e ID
* LP ID
* Port
A Un derlying Phys . Port
B Port Type
C Block ed port flag
D Modulus
E Outstan ding Frames
F N2 Maximum Retransmiss ion s
G T1 R etrans mis s. Period-ms
H T2 A ck nowledg. Delay-ms
I T3 Link A ssu ran ce Period-s
J Logical D CE
K Mask Lin k Alarms
1 X.25/Level 3 - Part 1
2 X.25/Level 3 - Part 2
3 X.25 C UG Managemen t
5 Logical Port Parameters
Select:
Figure 9-2 Logical X.25 Port Record
Pressing
[1], [2], [3]
When Changes Take Effect at the Port
When you add a new Port record, it will be written to the database as soon as you enter
the final parameter value. When you modify a parameter in an existing record, the
change will be written to the database immediately.
The change will become effective at the port in one of the following ways:
Press while still in Maintenance operations on the record. This will tempo-
[F7]
rarily disable the port, then write the change to the software running in the node.
Re-IPL the node containing the changed port.
10 nod e10
0 RLP
8
2
2 X.25
N
8
2
5
2000
1000
10
Y
Y
[A],[D],[C],[A]
, or will display more parameters, listed in
[5]
from Main Menu
Table 9-1.
9-3