Node Parameters - Cabletron Systems Netlink FRX8000 User Manual

Fully integrated lan/wan enterprise switch
Hide thumbs Also See for Netlink FRX8000:
Table of Contents

Advertisement

Node Defaults Parameters
Description
Alternate NMP Node
5-4
The following table lists all possible parameters on the first two screens.
depending on the values configured for some parameters, other parameters
might not be displayed.
Parameter
Description
Alternate NMP Node
7000 Node
Node Type
2nd Alternate NMP Node
Level "n" Prim ary Node
Level "n" Secondary Node
FRX8000-specific Parameters
IP Gateway?
RIP Version
IPX Router Nam e
IPX Router Network Address
IPX Gap Time
Connection Lim it
SNA LLC2 Virtual LAN ID
N7000-specific Parameters
Async Terminal Control
DOS Extended Mode
If this value is changed, you must also change the LP type in all Line Processor records
1
for this node, as well as any Logical Trunk port records. (See explanation.)
If you try to change the
2
activation key. (See explanation.)
Must be a value other than
3
is text that will follow the node number in various configuration record displays (as
shown after the node numbers at items B and E–M in
identifies an ICP, INM, or N7000 NMP (via its attached node) that will act as follows:
If the local node is an FRX8000 Switch or N74/7500 without a locally attached
NMP, the alternate NMP Node will provide the local node with network
defaults and other network data.
If the local (FRX8000 or N74/7500) node has a locally attached NMP, or is an
ICP or INM, the alternate NMP Node will take over the local node's man-
agement functions (receiving alarms, updating parameters, etc.) if the local node
loses contact with the network.
Table 5-1 Node Parameters
Valid Values
0–30 characters
1–250
Y/N
N7000:
0–4
FRX8000
: 0, 1, 4
1–250
1–250
1–250
Y/N
1, 2
1–48 characters
1–fffffffe
0–255 (
55 ms units
0–3
0–fff
Y/N
Y/N
Connection Lim it
, you will be asked to enter a serial number and
000
if LLC2 will run in the node.
Default Value
none
local node
1
N
0 (
DOS node w/NMP
local node
local node
local node
Y
1
OL8000_ (
node ID
)
00000001
2
)
2
0 (
256
)
000
3
N
N
Figure
5-2).
FRX8000 3.0 User Guide, Rev 02
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Netlink FRX8000 and is the answer not in the manual?

Questions and answers

Table of Contents