Replacing Protocol Id; Replacing Facilities; Translation Examples - Cabletron Systems Netlink FRX8000 User Manual

Replacing Protocol ID

Replacing Facilities

Translation Examples

Configuring X.25
= Text (valid for replacement of user data only). Type
T
by the text that will replace the user data.
Enter a string of up to four hex bytes. If fewer than four bytes are entered, the
remaining field is filled with zeroes.
Enter a string of up to 109 hex bytes.
– Replacing the first four digits of the called address with digits from the
Example 1
user data field—assume:
The Template ID is
The called address field in the template record is
A packet with called address
packet matches Template ID
of
U1234 U1234X5
received packet (
( ).
3110
of takes the fifth position of the template (
X5 U1234X5
match in the part of the original called address not yet translated (
(The match is found in the entire string
The translated called address is
Example 2 – Appending the subaddress from the user data to the called address—
assume:
The Template ID is
The called address field in the template record is
A packet with called address
matches Template ID
3110*U??
User data from the packet is appended to the called address
99
The translated called address is
.
3110*U*
31101234567890
; therefore, a translation occurs as follows:
3110*U*
indicates that positions 1, 2, 3, and 4 of the user data of the
) will replace the first four digits of the called address
5678
1234567890
56781234567890
.
3110*U??
and user data
311012345678
; therefore, a translation occurs as follows:
31101234567899
followed (with no spaces)
T
.
U1234X5
and user data is received. The
5678
) and searches for a
*
.)
.
.
X12345U12
is received. The packet
99
311012345678
.
).
1234567890
.
9-25