Configuring Subscriber Ids; Svc Subscriber Record - Cabletron Systems Netlink FRX8000 User Manual

Configuring Subscriber IDs

When Changes Take Effect
Configuring Async Pads
This operation creates records for the called and calling addresses that will be used in
X.25 call setup if async traffic will be transported over X.25 or (via an X.25 logical
port) frame relay. To complete the connection, the software must recognize where the
call is coming from (calling address) and where it is going (called address).
To configure an SVC Subscriber record, press
uration Menu (or
[A], [F], [A], [C]
, up to 15 digits (as described on
Subscriber ID
a universal wildcard.) If this is an existing record, a screen similar to Figure 13-4 will
be displayed. If this is a new record, enter the remaining requested information, noting
the values in Table 13-4.
Su bscrib er Maintenance
* S ubs criber ID
A S ubs criber Name
B D ialup S ubs criber
C R outing Algorithm
D S ystematic R ed irection
E R ed irect on Busy
F R ed irect on Ou t of Order
G Ban dw. A llocation Grou p
1 R outing Paths
2 R ed irection Add ress es
Select:
Figure 13-4 SVC Subscriber Record
The parameters displayed by pressing
When you add a new Subscriber record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database immediately.
The change will become effective as soon as the next call is placed. (The change will
not affect a call in progress.)
, then
[A]
from the Main Menu). When prompted, enter a
page 9-15). (The default is an asterisk,
10000100001
frs ub1
N
0 R ound Rob in
Y
N
N
1
[A], [F], [A], [C]
or are listed in
[1] [2]
at the Subscriber Config-
[C]
from Main Menu
Table 13-4.
13-17