V.25Bis Modem Operations; Cug Parameter - Cabletron Systems Netlink FRX8000 User Manual

When Changes Take Effect
CUG Parameters
CUG Number
Incoming Calls Barred
Outgoing Calls Barred

V.25bis Modem Operations

Creating a Modem Initialization Record
9-12
Changes to this file take effect when the associated port is updated by one of the
methods described under
change can be implemented on line by exiting the record (
ciated Port record and pressing
Parameter
CUG Number
Incoming Calls Bar red
Outgoing Calls Bar red
is a number that will be associated with the index.
is an X.25 facility that prevents (if
CUG.
is an X.25 facility that prevents (if
CUG.
A record can be created that specifies a string of data to be sent out (verbatim) from a
V.25bis dial port to the modem each time the port is enabled (by node IPL or port
disable/enable).
Press at the Port Configuration Menu (or
[E]
prompted, enter:
(specified in the Port record).
String name
Any other requested information, noting Table 9-3.
Explanations of some parameters follow the table.
"When Changes Take Effect at the
to update the port.
[F7]
Table 9-2 X.25 CUG Parameter
Valid Values
1–16383
Y/N
Y/N
) transmission of incoming calls within a specific
Y
) transmission of outgoing calls within a specific
Y
[A], [D, [E]
Port" on page 9-3. A
), then opening the asso-
[F3]
Default Value
1
N
N
from the Main Menu). When
FRX8000 3.0 User Guide, Rev 02