Configuring A Static Ip Route; Ip Route Record - Cabletron Systems Netlink FRX8000 User Manual

Configuring a Static IP Route

When Changes Take Effect
14-8
Routing of IP traffic is handled dynamically by such protocols as RIP, as well as via
static routes configured in the FRX8000. To configure a route, press
the Connections and Routing Paths Selection Menu (or
Menu). When prompted, enter:
:
Node number 1–250
Interface number
Any other requested information, noting
I P Route Maintenance
* Node
* Interface N umber
A Router
B Metric C ount
C Route Typ e
D Route D es tin ation
E Destination Mask
S elect:
When you add a new IP Route record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database instantly.
To make the change effective, press
done, the change will become effective the next time the node containing the interface
undergoes re-IPL.)
.
: , which is simply an identifier.
0–999
10
123
255.255.255.255
1
0 N etw ork
0.0.0.0
255.255.255.255
Figure 14-2 IP Route Record
while the record is displayed. (If this is not
[F7]
[D]
[A], [F], [D], [C]
Table 14-2.
[A],[F],[D],[C]
from Main Menu
FRX8000 3.0 User Guide, Rev 02
, then from
[C]
from the Main