Cabletron Systems Netlink FRX8000 User Manual page 389
Fully integrated lan/wan enterprise switch
Hide thumbs
Also See for Netlink FRX8000:
- Reference manual (238 pages) ,
- Installation and setup manual (94 pages)
Table of Contents
Advertisement
Alarms
Action:
Check the modem to make sure it is operational.
736.
SDLC LLC/2 Remote Link Stn lost
Severity:
2
Meaning:
The remote station is not responding. Either the Inactivity Timer (
or Acknowledgment Timer (
Action:
Check the remote station to make sure it is operational.
737.
LLC/2 DM Received
Severity:
2
Meaning:
The remote station sent a Disconnect Mode response, and the logical
link is down.
Action:
None.
738.
LLC/2 SABME Received when open
Severity:
2
Meaning:
The remote station sent a SABME to the local station, but the local
station had already been initialized via a SABME–UA exchange.
Action:
None. If the problem persists, contact
Support. (See page 21-7.)
739.
LLC/2 FRMR Rcvd, Invalid Command
Severity:
2
Meaning:
The remote device received an invalid or unsupported command,
and returned a Frame Reject.
Action:
None.
740.
LLC/2 FRMR Rcvd, IFLD not permitted
Severity:
2
Meaning:
The remote device received an I-frame when it was not permitted,
and returned a Frame Reject.
Action:
None.
741.
LLC/2 FRMR Rcvd, Invalid Nr
Severity:
2
Meaning:
The remote device received an invalid N(r), and returned a Frame
Reject.
Action:
None.
742.
LLC/2 FRMR Rcvd, IFLD too long
Severity:
2
Meaning:
The remote device received an I frame that was too long, and
returned a Frame Reject.
) has expired.
T2
Cabletron Systems Technical
)
Ti
21-67
Advertisement
Table of Contents
Need help?
Do you have a question about the Netlink FRX8000 and is the answer not in the manual?
Questions and answers