Cabletron Systems Netlink FRX8000 User Manual page 350

21-28
177.
Disable on Node "n" LP "n" initiated
Severity: 4
Meaning: Self-explanatory.
178.
Enable on Node "n" LP "n" initiated
Severity: 4
Meaning: Self-explanatory.
179.
On-line LP parameter change initiated for Node "n" LP "n"
Severity: 4
Meaning: Self-explanatory.
180.
On-line Channel Map parameter change initiated for Node "n" LP "n"
Severity: 4
Meaning: Self-explanatory. (N74/7500 only.)
181.
LP "n" Port "n", configured for extended sequence numbering, received SABM
Severity: 4
Meaning: The Port record is configured for a maximum frame sequence
number (
received setting the mode to allow a maximum of 7.
182.
LP "n" Port "n", configured for normal sequence numbering, received SABME
Severity: 4
Meaning: The Port record is configured for a maximum frame sequence
number
received setting the mode to allow up to 127.
183.
File download from node "n" to boot disk at node "n" initiated
Severity: 4
Meaning: The operator initiated a software or parameter download to the node.
184.
File download from node "n" to boot disk at node "n" completed
Severity: 4
Meaning: The download indicated in message 183 has been completed.
185.
File download from node "n" to boot disk at node "n" failed
Severity: 4
Meaning: The download indicated in message 183 failed.
186.
Call Accounting file is "n" Mbytes.
Severity: 4
Meaning: The Call Accounting file is taking up a lot of disk space, which may
run out if something is not done.
) greater than 7, but a command was
Outstanding Frames
) of 7 or fewer, but a command was
(Outstanding Frames
FRX8000 3.0 User Guide, Rev 02