Cabletron Systems Netlink FRX8000 User Manual page 353

Alarms
Meaning: Self-explanatory.
208.
Cannot access /u/netlink/acnt on node "n"
Severity: 4
Meaning: Someone has attempted to roll over the Call Accounting file on the
specified node, and the directory acnt does not exist.
Action: Contact
209.
Backup call accounting file deleted on node "n"
Severity: 4
Meaning: A backup file was deleted using the Display/Delete Call Accounting
File operation.
210.
Checksum error in load generation message to this node
Severity: 4
Meaning: A load generation message has been received and the checksum cal-
culated does not equal the checksum in the message.
215.
PVC connected from LP "n" Port "n" LCN "n" to Node "n" LP "n" Port "n" LCN "n"
Severity: 4
Meaning: Self-explanatory.
216.
PVC from LP "n" Port "n" LCN "n" to Node "n" LP "n" Port "n" LCN "n" failed
Severity: 4
Meaning: The attempted connection was not successful, probably because one
end was down.
217.
X25 LP "n" Port "n" is configured but not strapped to generate clocks
Severity: 1
Meaning: The port (on a AST card) has been configured to generate clock;
however, the LP hardware is configured as physical DTE, which
does not generate clock.
Action: Depending on whether you want this port to generate clock, change
either the Port record or the LP jumpers.
218.
X25 LP "n" Port "n" is strapped but not configured to generate clocks
Severity: 1
Meaning: The AST LP hardware is configured as physical DCE, which
generates clock; however, the port has been configured not to
generate clock.
Action: Depending on whether you want this port to generate clock, change
either the Port record or the LP jumpers.
219.
Illegal TC/Gen Clk Combination
Severity: 1
Cabletron Systems Technical Support. (See page 21-7.)
21-31