Cabletron Systems Netlink FRX8000 User Manual page 244

Router
Interface
SAP Route Parameters
Service Number
Service Type
Server Name
Server Network Address
Server Node Address
Server Socket Number
Intervening Networks
Router
Interface
15-20
Is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file), this field will be ignored.
is the IPX network number assigned to the interface used.
identifies this specific service at the node defined by Node Number. Service numbers
do not have to be consecutive, or unique to the entire internetwork.
is a SAP Service Type code. Some common types are:
= print queue
0003
= print server
0007
identifies a specific server in the IPX internetwork.
is an IPX network number assigned to the network containing the server identified by
.
Server Name
identifies the IPX node attached to the server network.
is an IPX socket number that identifies the process. For example, the SAP process is
.
0452
is the number of routers that a packet must pass through to reach the server, if this
route is used.
is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file), this field will be ignored.
is the IPX network number assigned to the interface used to send packets that are des-
tined for this server.
= file server
0004
= archive server
0009
= job server
0005
= remote bridge server
0024
FRX8000 3.0 User Guide, Rev 02