Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
5.3.6 Configuring Event Notification
You can set alarm notification by email or SMS as required. Information about a
maximum of 20 users who will receive alarm notification can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:
●
●
Procedure
Step 1 Choose System Settings > Event Notification.
Step 2 Set related outbox parameters.
1.
2.
If Test email sending failed is displayed, check whether the receiver's email
server requires CA certificate verification. If it is required, download the CA
certificate from the receiver's email website and upload it in the Mailbox
Certificate area.
Issue 03 (2021-07-15)
The ECC800-Pro is configured with a 4G module and supports standard SIM
card access.
The ECC800-Pro is connected to a network with an email server through a
WAN port. Both the Internet and local area network (LAN) are supported.
NO TE
To use the WeChat notification function, connect the ECC800-Pro to the EDCM system. For
details, see the user guide of the EDCM system.
Set related parameters in the Outbox Settings area on the Mailbox Settings
page. If the address type of the outbox is Domain name, choose System
Settings > System Parameters, and set related parameters in the DNS
Server Address area on the Monitor IP page.
NO TE
The DNS server address is provided by the local network operator.
Click Test to check the email sending. If an email fails to be sent, check the
outbox settings and DNS Server Address. If the email is sent successfully,
click Submit.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
152
Advertisement
Table of Contents
