FusionModule2000-S Smart Modular Data Center
User Manual
7.2 Preparing Monitoring Cables
Prerequisites
●
●
Preparing a Cord End Terminal
Figure 7-3
1.
2.
3.
Figure 7-3 Preparing a cord end terminal
(A) Cord end terminal
connector
Preparing RS485 Monitoring Cables
Figure 7-4
Issue 03 (2021-07-15)
A network cable, cord end terminals, and RJ45 connectors are prepared.
The following tools are prepared:
–
Wire stripper
–
Crimping tool
–
RJ45 crimping tool
–
Electrician's knife
–
Insulation tape
shows how to prepare a cord end terminal.
Strip the insulation layer of cable B to expose cable core C.
Put cable core C through cord end terminal A.
Crimp the metal part of cord end terminal A using the crimping tool.
shows how to prepare an RS485 monitoring cable for the ECC collector.
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
7 Appendix
(C) Copper core wire
269