Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 3 Set NetEco communications parameters and authentication password on the
ECC800-Pro WebUI.
Table 5-44 NetEco parameters
Path
System
Settings >
NMS
Application
> NetEco >
Communicat
ion
Parameters
Table 5-45 Setting an authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Issue 03 (2021-07-15)
Table 5-43 Mobile data
Path
Paramete
r
Choose
Mobile
System
data
Settings >
control
System
Paramete
rs >
Mobile
Data.
Parameter
Server IP
Port number
Network port
for link setup
Parameter
Authenticatio
n password
Copyright © Huawei Technologies Co., Ltd.
Default
Setting
Value
Disable
Set this parameter to Enable and
click Submit.
Default
Setting
Value
192.168.8.
IP address of the primary NetEco
11
server
NOTE
The NetEco IP address and the ECC800-
Pro IP address must be configured in
the same network to ensure normal
connection between the NetEco and
the ECC800-Pro.
31220
31220
WAN_1
WAN_1
Default
Setting
Value
Modifyme
Set this parameter based on
_123
customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
5 Power-On Commissioning
211
Advertisement
Table of Contents
