Configuring Switch; Configure Quorum Server Software; Configuring The Arbitration Software (Suse) - Huawei OceanStor 2000 V3 Series Features Manual

Hypermetro feature guide for block
Hide thumbs Also See for OceanStor 2000 V3 Series:
Table of Contents

Advertisement

OceanStor V3 Series
HyperMetro Feature Guide for Block
l
l
l

4.3 Configuring Switch

This section describes the configuration requirements of core switches and access switches at
the network layer and configuration procedure of the Fibre Channel switches at the storage
layer.
Context
For the detailed configurations on switches (includes setting domain IDs, configuring the
long-distance mode for links, and creating a zone), see
Documentation V200R001 (Active-Active Data

4.4 Configure Quorum Server Software

This section describes how to configure the quorum server software. Quorum server software
needs to be configured only when a quorum server is used for HyperMetro.

4.4.1 Configuring the Arbitration Software (SUSE)

This section describes how to configure the arbitration software in SUSE.
Prerequisites
The arbitration software must be configured in user mode.
Procedure
Step 1 Prepare for the configuration.
Before the configuration, make sure that the quorum server has been configured with service
IP address and firewall.
1.
Issue 05 (2018-01-30)
Storage units have been deployed at a third-place quorum site.
If other features besides HyperMetro need to be configured for the storage system, see
the Impact and Restrictions section about the interaction among features.
The required licenses have been applied and imported based on the license operation
guide.
Configure a service IP address for the quorum server.
NOTE
If two ports of the quorum server are not bonded, IP addresses of the two ports must be from different
network segments. If the two ports of the quorum server are bonded, you only need to configure a
virtual IP address for arbitration.
– When deploying the arbitration software using VMs, you need to create network
adapters and switches for VMs. In this example, arbitration software is deployed on
VMs, and two ports of the quorum server are not bonded.
show configuration requirements.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BC&DR Solution Product
Center).
Figure 4-2
4 Configuration
and
Table 4-2
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents