Table of Contents
Advertisement
FusionModule2000-S Smart Modular Data Center
User Manual
Step 2 Add a PDU2000.
1.
2.
3.
Issue 03 (2021-07-15)
Figure 5-8 PDU2000-M (H) communications settings
–
Press DOWN and UP to select the address to be set.
–
Press MENU to confirm the settings.
NO TE
If modification is successful,
Log in to the ECC800-Pro WebUI as an administrator.
Add a PDU2000.
Table 5-12 Adding a PDU2000
Path
Parameter
Choose
Device
System
Attribute
Settings >
Device Type
Device
Management
and click Add
Device. The
Connect To
parameters
for adding
devices are
Communicati
displayed.
ons Port
Device
Address
Click Test Connect to check whether the PDU2000 connects to the ECC800-
Pro properly.
–
If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
Copyright © Huawei Technologies Co., Ltd.
is displayed:
Setting
Select PDU from the drop-down list box.
Select PDU2000-M (C) or PDU2000-M
(H) from the drop-down list box based on
the actual device.
Select ECC800 from the drop-down list
box.
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the
PDU2000 is connected to the COM1 port on the
ECC800-Pro. If the PDU2000 is connected to
another port, enter the number of the
connected port.
Enter the actual device address of the
PDU2000.
5 Power-On Commissioning
is displayed: If modification fails,
140
Advertisement
Table of Contents
