Huawei FusionModule2000-S User Manual page 11

FusionModule2000-S Smart Modular Data Center
User Manual
●
●
●
●
●
●
General Requirements
●
●
●
●
●
●
●
Issue 03 (2021-07-15)
Installation or use in environments which are not specified in relevant
international or national standards
Unauthorized modifications to the product or software code or removal of the
product
Failure to follow the operation instructions and safety precautions on the
product and in this document
Equipment damage due to force majeure, such as earthquakes, fire, and
storms
Damage caused during transportation by the customer
Storage conditions that do not meet the requirements specified in this
document
Do not install, use, or operate outdoor equipment and cables (including but
not limited to moving equipment, operating equipment and cables, inserting
connectors to or removing connectors from signal ports connected to outdoor
facilities, working at heights, and performing outdoor installation) in harsh
weather conditions such as lightning, rain, snow, and level 6 or stronger wind.
Before installing, operating, or maintaining the equipment, remove any
conductive objects such as watches or metal jewelry like bracelets, bangles,
and rings to avoid electric shock.
When installing, operating, or maintaining the equipment, wear personal
protective equipment such as insulation gloves, goggles, and safety clothing,
helmet, and shoes, as shown in the following figure.
Follow the specified procedures for installation, operation, and maintenance.
Before handling a conductor surface or terminal, measure the contact point
voltage and ensure that there is no risk of electric shock.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
In the case of a fire, immediately leave the building or the equipment area,
and turn on the fire alarm bell or make an emergency call. Do not enter the
building on fire in any case.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
2